Recommended Package Ready-Made Package

5–6kW Residential Solar Package

5–6kW Residential Solar Package

5–6kW Residential Solar Package solar package planning tier with 48V battery architecture.

5–6kW Residential Solar Package for calculator results in the 5–6kW planning range, using a 48V battery architecture.

Estimated Price: ₱300,000 – ₱395,000

Solar Capacity6.0kW
Inverter Power6.5kW
Battery System48V
Battery Target200Ah

Package overview

This ready-made planning tier covers approximately 5–6kW calculated inverter requirements. The package keeps the battery architecture at 48V and uses marketplace-available equipment references where a suitable match is verified.

Best suited for

Larger homes with higher simultaneous loads, backup needs, or multiple major appliances.

Planning guidance

This is a planning package, not a final electrical design. Verify exact inverter PV limits, battery current, protection, cabling, battery-bank configuration and site conditions before purchase or installation.

This package planning range is based on the listed hardware baseline and is not a final quotation. Installation, engineering, permitting, site access, freight, protection upgrades, and final electrical design may change the actual project cost.

Calculated hardware matches

Recommended Hardware & Equipment

Top verified inverter and battery options matched to this package's system voltage and power/storage baseline. Closest Match pages use the calculator's exact requirements.

Solar 550W Monocrystalline Solar Panel

550W Monocrystalline Solar Panel

A 550W monocrystalline panel sized for standard residential and small commercial roofs, giving you strong output per panel without needing an oversized array.

6.5kW target • 550W selected • 11 panels recommended

Specification: Listed as 550W JA Solar 550W Monocrystalline; verify exact Vmp/Imp, dimensions, connector type, warranty, seller, and current stock before purchase.

Estimated Price: ₱5,000 - ₱6,500

Recommended quantity: 11 × 550W panels

PowMr 6.5kW 48V Hybrid Solar Inverter Inverter

PowMr 6.5kW 48V Hybrid Solar Inverter

A 6.5kW 48V hybrid inverter built for mid-size homes that need a solid step up from entry-level 3-5kW systems.

6.5kW target • 48V system • 6.5kW selected • hybrid • built-in MPPT • within rounding tolerance

Specification: Exact reference SKU: POW-HVM6.5K-48V-E • Rated power: 6.5kW • Battery voltage: 48V • Maximum PV input power: 6.5kW • Maximum PV voltage: 450V DC • MPPT range: 55–450V DC

Estimated Price: ₱18,500 - ₱20,600

Recommended quantity: 1 unit

Deye 8kW Hybrid Inverter Inverter

Deye 8kW Hybrid Inverter

An 8kW Deye hybrid inverter with dual MPPT trackers, built for larger homes running two separate strings of panels.

6.5kW target • 48V system • 8.0kW selected • hybrid • built-in MPPT

Specification: Exact reference model: SUN-8K-SG01LP1-EU • Rated output: 8kW class • Battery voltage range: 40–60V • Maximum charging/discharging current: 190A • MPPT trackers: 2 • Protection rating: IP65

Estimated Price: ₱30,000 - ₱45,000

Recommended quantity: 1 unit

CST Energy 48V 200Ah LiFePO4 Battery Battery

CST Energy 48V 200Ah LiFePO4 Battery

A 48V 200Ah LiFePO4 battery storing about 10.24kWh, a strong mid-to-large capacity option for 48V hybrid systems.

48V system • 200Ah target • 200Ah per unit

Specification: 51.2V-class / 48V system • 200Ah • ~10.24kWh nominal • built-in BMS indicated on current listing

Estimated Price: ₱35,999 - ₱122,800

Recommended quantity: 1 unit • target 200Ah • 200Ah per unit

CST Energy 48V 300Ah LiFePO4 Battery Battery

CST Energy 48V 300Ah LiFePO4 Battery

A large 48V 300Ah LiFePO4 battery with Bluetooth monitoring, offering roughly 14.3kWh for substantial household or small commercial backup.

48V system • 200Ah target • 300Ah per unit

Specification: 48V class / 51.2V nominal • 300Ah • 14.336kWh listed • Built-in BMS

Estimated Price: ₱115,000 - ₱125,000

Recommended quantity: 1 unit • target 200Ah • 300Ah per unit

6mm² Solar DC Cable (per meter) Solar Cables

6mm² Solar DC Cable (per meter)

6mm² solar-rated DC cable, sold by the meter, for wiring panels to charge controllers, combiner boxes, or inverters.

6.5kW target • 6mm² Solar DC Cable (per meter) • estimated 132m

Specification: 6mm² (10 AWG) pure copper, TUV-certified PV1-F / EN 50618, 1500V DC rated, UV- and weather-resistant double insulation, -40°C to +90°C operating range.

Estimated Price: ₱35 - ₱55

Estimated quantity: 132 meters

Solar Bright 2.2m Aluminum Solar Mounting Rail Kit Mounting Rails

Solar Bright 2.2m Aluminum Solar Mounting Rail Kit

A 2.2-meter aluminum mounting rail kit, the structural backbone for securing panels to a pitched or flat roof.

6.5kW target • 11 panel layout • 2 rail kits

Specification: Anodized AL6005-T5 aluminum rails, 36–42mm panel compatibility, mid and end clamps included, designed for up to 10 panels per kit, corrosion-resistant coating for coastal areas.

Estimated Price: ₱3,100 - ₱3,800

Recommended quantity: 2 kits

Solar DC Breaker & Protection Set DC/AC Breakers

Solar DC Breaker & Protection Set

A set of DC breakers for protecting your solar PV wiring, meant to isolate strings and prevent damage from overcurrent conditions.

6.5kW system target • DC/AC Breakers • package baseline selection

Specification: DC PV breaker rated 500V DC / 32A, AC breaker rated 230V AC / 63A, DIN-rail mountable, rated for outdoor-rated solar string protection.

Estimated Price: ₱1,500 - ₱4,500

Recommended quantity: 1 set

Solar DC Surge Protection Device (SPD) Surge Protection

Solar DC Surge Protection Device (SPD)

A DC surge protection device for solar PV systems, designed to protect your equipment from voltage spikes caused by lightning or grid disturbances.

6.5kW system target • Surge Protection • package baseline selection

Specification: DC surge arrester Type 2, 1000V DC Uc, 40kA In; AC surge arrester Type 2, 275V AC Uc, 40kA In; DIN-rail mount with status indicator.

Estimated Price: ₱240 - ₱300

Recommended quantity: 1 set

Compare Packages

How This Package Compares

Package Solar Inverter Battery Estimated Price
1–2kW Hybrid Starter Kit 2 kW 1.6 kW 12V 200Ah ₱90,000 – ₱115,000
2–3kW Hybrid Starter Kit 3 kW 3 kW 24V 200Ah ₱160,000 – ₱205,000
3–4kW Hybrid Starter Kit 4 kW 4.2 kW 24V 200Ah ₱190,000 – ₱250,000
4–5kW Residential Solar Package 5 kW 5 kW 24V 200Ah ₱220,000 – ₱285,000
5–6kW Residential Solar Package This package 6 kW 6.5 kW 48V 200Ah ₱300,000 – ₱395,000
6–7kW Residential Solar Package 7 kW 7 kW 48V 200Ah ₱330,000 – ₱430,000
7–8kW Large Residential Package 8 kW 8 kW 48V 200Ah ₱360,000 – ₱470,000
8–9kW Large Residential Package 9 kW 8.2 kW 48V 200Ah ₱390,000 – ₱510,000
9–10kW Large Residential Package 10 kW 10.2 kW 48V 200Ah ₱415,000 – ₱540,000
10–11kW Small Commercial Package 11 kW 11 kW 48V 200Ah ₱430,000 – ₱560,000
11–13kW Small Commercial Package 13 kW 13.2 kW 48V 200Ah ₱495,000 – ₱645,000
16kW Commercial Hybrid Solar Package 16 kW 16 kW 48V 400Ah ₱675,000 – ₱875,000

Related Guides

Learn More Before You Buy

FAQ

Frequently Asked Questions

Who is the 5–6kW Residential Solar Package meant for?

Larger homes with higher simultaneous loads, backup needs, or multiple major appliances. It is a structured starting point for calculator results in the 5–6kW inverter-requirement range, built around an inverter rated 6.5kW and about 6.1kWp of solar panels.

What inverter, solar array and battery does the 5–6kW Residential Solar Package plan for?

The planning baseline uses a hybrid inverter rated 6.5kW, about 11 × 550W panels (roughly 6.1kWp) and a 48V 200Ah LiFePO4 battery bank (about 10.2kWh). Confirm the exact inverter PV and battery limits, your roof area and your priority-load list with a qualified installer before buying.

Does the 6.5kW inverter mean I can run every appliance at once?

No. Inverter capacity, motor-starting surge, service capacity and the home’s wiring all matter. Air conditioners, pumps and compressors can create short starting loads that need to be checked before final sizing.

Can the 5–6kW Residential Solar Package qualify for Meralco net metering?

Hybrid inverters can often be configured for net metering, but eligibility depends on your specific inverter model, utility application and local requirements. Confirm compatibility with your installer and utility before assuming export credits apply.

Share this page

Know someone planning their solar setup?

Share this guide with family, friends, or your community.