Recommended Package Ready-Made Package

2–3kW Hybrid Starter Kit

2–3kW Hybrid Starter Kit

2–3kW Hybrid Starter Kit solar package planning tier with 24V battery architecture.

2–3kW Hybrid Starter Kit for calculator results in the 2–3kW planning range, using a 24V battery architecture.

Estimated Price: ₱160,000 – ₱205,000

Solar Capacity3.0kW
Inverter Power3.0kW
Battery System24V
Battery Target200Ah

Package overview

This ready-made planning tier covers approximately 2–3kW calculated inverter requirements. The package keeps the battery architecture at 24V and uses marketplace-available equipment references where a suitable match is verified.

Best suited for

Small homes, apartments, and essential-load backup circuits that need a low-cost entry point into solar plus battery storage.

Planning guidance

This is a planning package, not a final electrical design. Verify exact inverter PV limits, battery current, protection, cabling, battery-bank configuration and site conditions before purchase or installation.

This package planning range is based on the listed hardware baseline and is not a final quotation. Installation, engineering, permitting, site access, freight, protection upgrades, and final electrical design may change the actual project cost.

Calculated hardware matches

Recommended Hardware & Equipment

Top verified inverter and battery options matched to this package's system voltage and power/storage baseline. Closest Match pages use the calculator's exact requirements.

Solar 550W Monocrystalline Solar Panel

550W Monocrystalline Solar Panel

A 550W monocrystalline panel sized for standard residential and small commercial roofs, giving you strong output per panel without needing an oversized array.

3.0kW target • 550W selected • 6 panels recommended

Specification: Listed as 550W JA Solar 550W Monocrystalline; verify exact Vmp/Imp, dimensions, connector type, warranty, seller, and current stock before purchase.

Estimated Price: ₱5,000 - ₱6,500

Recommended quantity: 6 × 550W panels

Flowatt 3kW Hybrid Solar Inverter System Inverter

Flowatt 3kW Hybrid Solar Inverter System

A compact 3kW hybrid solar inverter with a built-in MPPT charge controller, for homes that want solar backup without needing a separate charge controller.

3.0kW target • 24V system • 3.0kW selected • hybrid • built-in MPPT • within rounding tolerance

Specification: 3kW-class hybrid inverter with built-in MPPT charging. No built-in battery. Verify exact model specifications before purchase.

Estimated Price: ₱10,999 - ₱11,999

Recommended quantity: 1 unit

Anern 4.2kW Hybrid Solar Inverter Inverter

Anern 4.2kW Hybrid Solar Inverter

A 4.2kW hybrid inverter from Anern with dual AC output and strong surge capacity, suited to small-to-mid households.

3.0kW target • 24V system • 4.2kW selected • hybrid • built-in MPPT

Specification: 4.2kW rated output • 24V-class battery system • up to 6200W PV input • 60–450V MPPT • 18A maximum PV input • 8400W surge • verify exact model

Estimated Price: ₱15,200 - ₱17,200

Recommended quantity: 1 unit

PonyEnergy 24V 200Ah LiFePO4 Battery Battery

PonyEnergy 24V 200Ah LiFePO4 Battery

A 24V 200Ah LiFePO4 battery storing about 5.12kWh, sized for 24V inverter systems that need more capacity than the smaller 100Ah option.

24V system • 200Ah target • 200Ah per unit

Specification: Chemistry: LiFePO4 • Nominal voltage class: 24V; cell-pack voltage: 25.6V • Capacity: 200Ah • Nominal energy: 5.12kWh (25.6V × 200Ah) • Current listing: 200A BMS/current class • Series-connectible according to the current marketplace listing

Estimated Price: ₱32,199 - ₱33,499

Recommended quantity: 1 unit • target 200Ah • 200Ah per unit

PowMr 24V 100Ah Powerwall LiFePO4 Battery Battery

PowMr 24V 100Ah Powerwall LiFePO4 Battery

A wall-mounted 24V 100Ah LiFePO4 battery storing about 2.4kWh, built for 24V home solar and backup systems.

24V system • 200Ah target • 100Ah per unit • 2 units in parallel

Specification: Reference model: POW-LIO24100 • Nominal voltage: 24V • Capacity: 100Ah • Nominal energy: approx. 2.4kWh • Maximum charge current: 100A • Maximum discharge current: 100A

Estimated Price: ₱17,800 - ₱26,800

Recommended quantity: 2 units • target 200Ah • 100Ah per unit • Battery bank: 2 in parallel

6mm² Solar DC Cable (per meter) Solar Cables

6mm² Solar DC Cable (per meter)

6mm² solar-rated DC cable, sold by the meter, for wiring panels to charge controllers, combiner boxes, or inverters.

3.0kW target • 6mm² Solar DC Cable (per meter) • estimated 72m

Specification: 6mm² (10 AWG) pure copper, TUV-certified PV1-F / EN 50618, 1500V DC rated, UV- and weather-resistant double insulation, -40°C to +90°C operating range.

Estimated Price: ₱35 - ₱55

Estimated quantity: 72 meters

Solar Bright 2.2m Aluminum Solar Mounting Rail Kit Mounting Rails

Solar Bright 2.2m Aluminum Solar Mounting Rail Kit

A 2.2-meter aluminum mounting rail kit, the structural backbone for securing panels to a pitched or flat roof.

3.0kW target • 6 panel layout • 1 rail kit

Specification: Anodized AL6005-T5 aluminum rails, 36–42mm panel compatibility, mid and end clamps included, designed for up to 10 panels per kit, corrosion-resistant coating for coastal areas.

Estimated Price: ₱3,100 - ₱3,800

Recommended quantity: 1 kit

Solar DC Breaker & Protection Set DC/AC Breakers

Solar DC Breaker & Protection Set

A set of DC breakers for protecting your solar PV wiring, meant to isolate strings and prevent damage from overcurrent conditions.

3.0kW system target • DC/AC Breakers • package baseline selection

Specification: DC PV breaker rated 500V DC / 32A, AC breaker rated 230V AC / 63A, DIN-rail mountable, rated for outdoor-rated solar string protection.

Estimated Price: ₱1,500 - ₱4,500

Recommended quantity: 1 set

Solar DC Surge Protection Device (SPD) Surge Protection

Solar DC Surge Protection Device (SPD)

A DC surge protection device for solar PV systems, designed to protect your equipment from voltage spikes caused by lightning or grid disturbances.

3.0kW system target • Surge Protection • package baseline selection

Specification: DC surge arrester Type 2, 1000V DC Uc, 40kA In; AC surge arrester Type 2, 275V AC Uc, 40kA In; DIN-rail mount with status indicator.

Estimated Price: ₱240 - ₱300

Recommended quantity: 1 set

Compare Packages

How This Package Compares

Package Solar Inverter Battery Estimated Price
1–2kW Hybrid Starter Kit 2 kW 1.6 kW 12V 200Ah ₱90,000 – ₱115,000
2–3kW Hybrid Starter Kit This package 3 kW 3 kW 24V 200Ah ₱160,000 – ₱205,000
3–4kW Hybrid Starter Kit 4 kW 4.2 kW 24V 200Ah ₱190,000 – ₱250,000
4–5kW Residential Solar Package 5 kW 5 kW 24V 200Ah ₱220,000 – ₱285,000
5–6kW Residential Solar Package 6 kW 6.5 kW 48V 200Ah ₱300,000 – ₱395,000
6–7kW Residential Solar Package 7 kW 7 kW 48V 200Ah ₱330,000 – ₱430,000
7–8kW Large Residential Package 8 kW 8 kW 48V 200Ah ₱360,000 – ₱470,000
8–9kW Large Residential Package 9 kW 8.2 kW 48V 200Ah ₱390,000 – ₱510,000
9–10kW Large Residential Package 10 kW 10.2 kW 48V 200Ah ₱415,000 – ₱540,000
10–11kW Small Commercial Package 11 kW 11 kW 48V 200Ah ₱430,000 – ₱560,000
11–13kW Small Commercial Package 13 kW 13.2 kW 48V 200Ah ₱495,000 – ₱645,000
16kW Commercial Hybrid Solar Package 16 kW 16 kW 48V 400Ah ₱675,000 – ₱875,000

Related Guides

Learn More Before You Buy

FAQ

Frequently Asked Questions

Who is the 2–3kW Hybrid Starter Kit meant for?

Small homes, apartments, and essential-load backup circuits that need a low-cost entry point into solar plus battery storage. It is a structured starting point for calculator results in the 2–3kW inverter-requirement range, built around an inverter rated 3kW and about 3.3kWp of solar panels.

What inverter, solar array and battery does the 2–3kW Hybrid Starter Kit plan for?

The planning baseline uses a hybrid inverter rated 3kW, about 6 × 550W panels (roughly 3.3kWp) and a 24V 200Ah LiFePO4 battery bank (about 5.1kWh). Confirm the exact inverter PV and battery limits, your roof area and your priority-load list with a qualified installer before buying.

Does the 3kW inverter mean I can run every appliance at once?

No. Inverter capacity, motor-starting surge, service capacity and the home’s wiring all matter. Air conditioners, pumps and compressors can create short starting loads that need to be checked before final sizing.

Share this page

Know someone planning their solar setup?

Share this guide with family, friends, or your community.